WMI Stage 1+ Turbo w/o Tank kit

$315.06 $294.49

Water/ Methanol Injection Kit benefits:

  • Decrease the manifold temperature.
  • Prevent from melting the pistons by decreasing EGT.
  • Increasing the total number of octane prevent knocking.
  • Increase dynamic compression.
  • Increase in combustion efficiency.
  • Reduces carbon monoxide (CO) emissions.
  • Reduces carbon dioxide (CO2) emission.
  • Reduces NOx emissions.
  • Reduces HC emissions.

Water-Methanol Injection Kit features:

  • When the pump start, led turn on and you can set the desired level.
  • Kit has the latest technology digital equipment.
  • Electronically controlled pump controller.
  • All parts produced by methanol durable materials.
  • Easy installation with special plugs.
  • Optional transfer pump offers up to use.
  • Optional horizontal float switch.

Download WMI Stg1+ Turbo – EN Pdf

22 in stock

Additional information
Reviews (0)

This kit without a tank, tank fitting and in-tank filter.

Stage 1+ Turbo: Single-stage flow based on the value from the Boost Switch.

Water/ Methanol Injection pump has no pressure cut off switch for eliminating any oscillation/pulsation. Internally bypasses for a smooth constant even flow at the nozzle. The pump is divided into two models which standard one is until 1000hp and the big one is up to 1000hp.

The new integrated solenoid valve and the nozzle assembly offers 100% safety for all injection systems utilizing a rear mounted reservoir, injection points under vacuum, or installs where injection nozzle is lower than the water-methanol reservoir. The solenoid fits nozzle between the pump and injection point and locks fluid in place when not in use adding safety and peace of mind to any injection system. The solenoid mounted nozzle works as injector style. Because of the reaction time is fast.

All metal equipment has the durability to corrosion of methyl alcohol and water, which constitute corrosion impact resistant nickel-plated brass, brass and EPDM grade plastic material.

All of our products are guaranteed for 2 years against the fabricated problem from the date of receipt by you.

Nozzles have a flow rating of your choice:

125 – 188 – 207 -247 – 288 – 328 – 369 ml/min or 2 – 3 – 3.3 – 3.9 – 4.6 – 5.2 – 5.8 GPH 

Please indicate which size you prefer before the order item. If you don’t specify the size, we will send you a 247 ml/min (3.9GPH).

If you are using only water, the total nozzle cc is half of the power of your car cc. If you are using 50-50% water and methanol mixture, your car’s power is cc-based. For example; only 200 cc/min for a 400 hp car using water, 400 cc/min if a methanol mixture is used.

Included: (If you want coil springed compression type fittings please indicate!)

  1. High-Pressure Diaphragm pump
  2. 2 x 3/4th NPT to ¼” compression type elbow fitting
  3. Nozzle
  4. Stainless steel M10 nut
  5. 6 x 80-micron stainless steel filter
  6. Boost switch
  7. 2 x 1/8th NPT to ¼” compression type female fitting
  8. Solenoid valve
  9. 1 x 1/8th NPT to ¼” compression type fitting
  10. Sensor controller
  11. 1,15 Gallon/ 4,6 Quart/ 4,3 Liter plastic tank
  12. Plastic tank cap
  13. Rubber O-ring
  14. 1/8th NPT in tank filter
  15. 20 FT/ 6-meter black injection hose
  16. ¼” compression type hose fitting
  17. Fuse holder
  18. 7,5 Amp fuse
  19. LED holder
  20. Quick splice connector
  21. 5*zip tie
  22. 4*screw for controller
  23. 2*screw and 2*washer for tank
  24. 4*screw and 4*washer for pump
  25. Stickers
  26. Installation manual
Dimensions 35 × 25 × 15 in


There are no reviews yet.

Be the first to review “WMI Stage 1+ Turbo w/o Tank kit”

Your email address will not be published. Required fields are marked *